WTC 200 - Additional Display; Additional Display Port; 16 Printouts; Adjustment Report

28
Procedure:
 Enter <5.2.Prtr / 5.2.1.Prt> submenu.
 Press key, parameter values are displayed successively one by one:
nonE
None port selected.
rS1
Port RS232.
USbA
USB port of type A, to which printer can be connected.
USbb
USB port of type A, to which computer can be connected.
UUF
Wireless communication *.
 Press key to confirm, next go to the home screen.
*) - Option
15.3. Additional Display
The weighing instrument can cooperate with additional WD displays.
15.3.1. Additional Display Port
 Enter <5.3.AdSP / 5.3.1.Prt> submenu.
 Press key, parameter values are displayed successively one by one:
nonE – none; rS1 – RS232.
 Press key to confirm, next go to the home screen.
16. PRINTOUTS
It is possible to define adjustment report printout template and GLP printout
template. To set the printouts go to <P6.Prnt> submenu.
16.1. Adjustment Report
<P6.1.CrEP> is a group of parameters allowing you to declare variables that
are to be printed on an adjustment report printout. Each variable features
accessibility attribute: YES – print, no – do not print. Adjustment report
is automatically generated at the end of each adjustment process.