WTC 200 - Date and Time; Default User Settings; 18 Scale Data

32
17.5. Date and Time
Parameter allowing you to set current date and time and to specify date and
time format.
Procedure:
 Enter <P7.Othr> submenu and change the settings. Refer to the below
table:
Parameter
Description
<7.5.SdAt>
Enter this parameter to set current date, where the date format is
YYYY.MM.DD*.
<7.6.Stnn>
Enter this parameter to set current time, where the time format is 24H**.
<7.7.FdAt>
Enter this parameter to set date format. Values: 1 - DD.MM.YYYY,
2 - MM.DD.YYYY, 3 - YYYY.MM.DD* (set by default), 4 - YYYY.DD.MM.
<7.8.Ftin>
Enter this parameter to set time format. Values: 24H** (set by default), 12H**.
*) - Date format: Y – year, M – month, D – day.
**) - Time format: 12H – 12-hour format, 24H - 24-hour format.
17.6. Default User Settings
Parameter allowing you to restore default operator settings.
Procedure:
 Enter <P7.Othr / 7.9.dFLu> submenu, text <Cont?> is displayed
(Continue?).
 Press key to confirm. The process of restoring default settings starts,
this is signalled with display of 'dash', < - >.
 Upon process completion <7.9.dFLu> submenu is displayed. Go to home
screen.
18. SCALE DATA
Scale data menu <P8.InFo>, provides information on the weighing device
and its program. The parameters serve informative purposes:
Parameter
Description
<8.1.Idb>
Serial number of the scale.
<8.2.PurS>
Program version.
<8.3.PStP>
Settings printout. Enter the parameter to send scale settings to printer port
(all parameters).