WTC 200 - Local Settings; Selecting Operation Mode; Reference Sample Mass Determined by Weighing; Reference Sample Mass Determined by Entering the Mass Value

39
23.1. Local Settings
To go to local settings enter <3.4.dEu> submenu.
3.4.1.Acc
Working mode accessibility
For detailed description read section 19.2.1.
3.4.2.UUt
Operation mode
For detailed description read section 23.1.1.
3.4.3.Snn
Save mode
For detailed description read section 19.2.2.
3.4.4.Int
Time interval
For detailed description read section 19.2.3.
3.4.5.Lo
Lo threshold
For detailed description read section 19.2.4.
23.1.1. Selecting Operation Mode
Parameter allowing you to select method of determination of reference sample
mass.
Procedure:
 Enter <3.4.dEu / 3.4.2.UUt> submenu.
 Press key, parameter values are displayed successively one by one:
S_S
Select to set reference sample mass by determining the mass value.
Suu
Select to set reference sample mass by entering the mass value.
 Set respective value and press key to confirm, next go to the home
screen.
23.2. Reference Sample Mass Determined by Weighing
 Enter <3.4.dEu / 3.4.2.UUt> submenu, set <S_S> value.
 Enter <dEu> working mode (Percent weighing), first, text <LoAd>
is displayed for 1 second, then the weighing window.
 Load the weighing pan with the reference sample. When the indication
is stable ( pictogram is displayed), press key to confirm the
mass.
 Mass of the weighed load is automatically set as reference sample mass,
the home screen is displayed along with 100.000% value.
23.3. Reference Sample Mass Determined by Entering the Mass Value
 Enter <3.4.dEu / 3.4.2.UUt> submenu, set <Suu> value.
 Enter <dEu> working mode (Percent weighing).