WTC 200 - Computer Port; Continuous Transmission; Printout Interval for Continuous Transmission; Printer

27
15.1.1. Computer Port
 Enter <5.1.PC / 5.1.1.Prt> submenu.
 Press key, parameter values are displayed successively one by one:
nonE – none; rS1 – RS232, USbb – USB type B, UUF – Wireless
communication *.
 Press key to confirm, next go to the home screen.
*) - Option
15.1.2. Continuous Transmission
 Enter <5.1.PC / 5.1.2.Cnt> submenu.
 Press key, parameter values are displayed successively one by one:
nonE
Continuous transmission disabled.
CntA
Continuous transmission in basic unit.
Cntb
Continuous transmission in current/temporary unit.
 Press key to confirm, next go to the home screen.
15.1.3. Printout Interval for Continuous Transmission
Parameter enabling you to set frequency of printout for continuous
transmission. Printout interval is set in seconds with 0.1 [s] accuracy within
0.1 [s] - 3600 [s] range.
Procedure:
 Enter <5.1.PC / 5.1.3.Int> submenu, window for entering interval value
is displayed.
 Press key to confirm, next go to the home screen.
15.2. Printer
15.2.1. Printer Port
Parameter enabling you to select port to which data is to be sent upon pressing
key.