Ci7 XX0 BENCHTOP S P ECTROPHOTOMETER
35
Cleaning the Instrument
Your instrument requires very little maintenance to achieve years of reliable operation. However,
to protect your investment and maintain reading accuracy, a few simple-cleaning procedures
should be performed from time to time.
IMPORTANT:
Remove AC power from the instrument before performing any of these
cleaning procedures.
CAUTION: DO NOT use any solvents to the clean the instrument.
CAUTION: Use proper personal protective equipment (e.g., safety glasses)
when using compressed air.
If can air is used for any of the cleaning procedures that recommend air, do not
invert or tilt the can during use. This could cause damage.
CAUTION: When using chemicals, always follow the manufacturer’s personal
protection equipment recommendations in the chemical SDS.
Cleaning Quick Reference Table
Below is a quick reference to help you determine the proper cleaning methods. Refer to the
following pages for a more detailed description of the individual cleaning procedures.
Compressed
Air
Cleaner
with Water
free
Cloth
Protection
Equipment
(per SDS)
Compartment
Blocking
Panel
Plates
White Plaque
Plaque
To Next Page
Loading...
Need help?
General
