XAG V40 - Spray and Route Settings; Spray Settings Configuration; Route Settings Configuration

XAG AUSTRALIA

Spray Settings
Spraying Amount Dosage Volume of the RPA for Task Area
Atomized Droplet Droplet Size Atomization of the RPA for Task Area
Variable Dosage map Operation Beta Function (Coming Soon)
Spray along another segment Nozzle Selection during lane changes
• Entry & Exit Routes
Flight Height Flight Height Setting the RPA from Take-off Point to
Task Area.
Flight Speed Flight Speed Setting the RPA from Take-off Point to
Task Area.
Adopt Safe Point Planning Enabled:
This function will allow Pilots to add Guide Point to
guide the flight route of the RPA from Take-off point to
the Task Area.
Disabled:
Disabling this function will enable the options for “Set
Guide Point for Return”
Set Guide Point for Return Enabled:
This function will allow Pilots to add Guide Point to
guide the flight route of the RPA from Entering and
Exiting Routes.
Disabled:
APP will automatically create a yellow zone based on
the current setting based on Spray & Route Settings,
where there should not have any person or obstacles
as it is the possible flight path.
Route Settings