109
XAG AUSTRALIA
• Operating Route
Flight Height Flight Height Settings of the RPA during its
Autonomous Task.
Flight Speed Flight Speed Settings of the RPA during its
Autonomous Task.
Route Direction Flight Direction Settings of the RPA during its
Autonomous Task.
Route Interval Distance Settings between each lane
Boundary Safety Distance Safety Distance from the Boundary
Obstacle Safety Distance Safety Distance from the Obstacle
Maximum flight speed of Obstacles avoidance is 6m/s
🧷
IMPORTANT
• Advance Settings
Operation Area Operation Route & Type Settings
Follow Terrain Terrain Following Settings
Obstacle Avoidance Dynamic Radar Settings for Obstacles Avoidance.
Automatic route optimization Break-point is the location where the autonomous
task was interrupted by either Manual take-over via
APP or Remote Controller, empty liquid tank, or Low
Voltage battery.
Enable:
The RPA will automatically optimize and travel to the
Break-point and resume its flight from the breakpoint.
Disable:
Aircraft will operate based on the operation area and
restart the tasks anew.
Effectiveness of the Obstacle radar is dependent on the
obstacle’s material, location, shape, size, etc. Maintain
visual line of sight and pay attention to its flight, and
prepare to operate the aircraft and manually avoid
obstacles promptly or during an emergency.
🧷
IMPORTANT
To Next Page
Loading...
