XAG V40 - After-Flight Maintenance

111
XAG AUSTRALIA
• During transportation of the equipment or the aircraft is going to be idle for a long period, liquids
and residues must be drained from the aircraft.
• 
may cause liquid damage to critical module.
After-Flight Maintenance
Pesticides are corrosive which may causes erosion within the equipment and shorten service lifespan,
it is recommended to thoroughly clean UAV after each operation.
01
Refill the Liquid Tank with soap water or soap powder water, and engage all nozzle to
drain and clean out remaining residues within the spray system.
02
Refill the Liquid Tank with clean water, and engage all nozzle to drain and clean out
remaining soap water within the spray system.
03
Place an empty Liquid Tank, and engage all nozzle to drain and clean out remaining
residues within the spray system to avoid residues leakage during transportation and
possibly damaging other items.
04
Wringing a wet rag, then wipe and clean the exterior of the aircraft to remove any
stains and foreign object.
Warning