EasyManua.ls Logo

XAG V40 - Communication Interface Details; Communication Interface

XAG V40
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
121
XAG AUSTRALIA
1 CAN port;
3 mobile communication modules (2G/3G/4G);
1 dedicated 2.4GHz/5.8GHz WLAN.
Communication Interface
Communication
External Hardware Interface
Battery Extension Rod
Mobile communication network
Communication modules 2G/3G/4G
Protocols
GSM, CDMA2000/EVDO, WCDMA,
TD- SCDMA, LTE-FDD, LTE-TDD
Dedicated 2.4GHz/5.8GHz WLAN
Protocol supported Xlink Communication Protocol
Transmission performance Frequency range 2.400-2.4835GHz/5.735-5.835GHz
Channel spacing 20 MHz
Frequency error/ frequency stability ±10 ppm
Communication mode Full duplex
Communication protocol Transparent
Forward error correction FEC
Data rate 6Mbps
Modulation OFDM
Emission performance RF output power
Less than 1W
Subject to regional SRRC/FCC/CE standards
Reception performance
Decoding sensitivity -90dbm
Battery terminal × 1
SIM card slot × 3
Model B4100
Dimensions (Diameter x Height) 45mm x 1166mm
Capacity 7500mAh 99Wh
Input 12.0 V/1 A (Type-C port)
Output 14.4V/1A
Operating temperature -10° - 45° C
Port/Panel
Power Button × 1, Type-C Port × 1,
Battery Level/Status Display Panel × 1
Warranty Details 6 Months

Table of Contents

Related product manuals