Basic Installation Procedures
975-0822-01-01 13
Basic Installation Procedures
This section provides sample installation information as a guide
for your installation. For your convenience, the overall procedure
is divided into these main steps:
Step 1: Designing the Installation 14
Step 2: Choosing a Location for the Unit 19
Step 3: Mounting the Unit 20
Step 4: Connecting the AC Input Wires 22
Step 5: Connecting AC Output to an Existing AC Circuit 26
Step 6: Connecting the DC Cables 29
Step 7: Connecting to Port(s) on the Freedom X 34
Step 8: Testing Your Installation 36
NOTE: For marine applications, see additional installation
instructions on page 39.
To Next Page
Loading...
