QMS 3825/3225/2025 User's G uideC-6
CCI TT Group 3 an d 4
CCITT Group 3 and 4
The new DPI command for CCITT groups 3 and 4 is supported on
your printer. All supported CCITT commands are outlined in chapter
5, “Emulations,” of your system administrator’s guide.
DPI
Lineprinter Emulation
Orientation
Function Sets the print resolution (dots per inch) to match the
scanned resolution of the original image.
Syntax %%DPI (
horizontal vertical
)
horizontal
Identifies the horizontal resolution
vertical
Identifies the vertical resolution
Default Currently selected print system resolution
Notes This command can also be used to scale the image.
DPI resolutions above the original scanned resolution
will reduce the image while DPI resolutions below the
original scanned resolution will enlarge the image.
Function Specifies the default orientation of the lineprinter
document images before they are placed on the sheet.
Syntax %%IncludeFeature:lporientation(
value
)
Variable
value
Range Portrait
Landscape
Default Portrait
To Next Page
Loading...
Need help?
General