Number- U p
Printing
2-21
Daily Operation
4 Press the Select key. Press the Next key until the orientation
you want appears in the message window (in this example,
landscape). Press the Select key.
The message window momentarily displays
LANDSCAPE
IS SELECTED
and then
OPERATOR CONTROL
ORIENTATION
5 Press the Online/Offline key and the following prompt
appears:
SAVE CHANGES?
NO
6 Press the Next key until YES appears. Press the Select key
and then press the Online/Offline key to place the printer
back on line, making it available for the next print job.
Num ber-Up Printing
Your printer has the capability to do number-up, or “n-up,” printing
using QMS Document Option Commands. Number-up printing allows
you to print a high volume of pages on less paper at a fraction of the
time. For example, you may choose 2-up (two pages printed on one
side of a page and printed in half the time) or 4-up (four pages printed
on one side of a page and printed in one quarter of the time). Refer to
the
QMS Crown Document Option Commands
manual for complete
information on how to do number-up printing.
To Next Page
Loading...
Need help?
General