QMS 3825/3225/2025 User's G uideF-2
Manual Notice
QMS, Inc. reserves the right to make changes to this manual and to the equipment
described herein without notice. Considerable effort has been made to ensure that this
manual is free of inaccuracies and omissions. However, QMS, Inc. makes no warranty
of any kind including, but not limited to, any implied warranties of merchantability
and fitness for a particular purpose with regard to this manual. QMS, Inc. assumes
no responsibility for, or liability for, errors contained in this manual or for incidental, special,
or consequential damages arising out of the furnishing of this manual, or the use of this
manual in operating the equipment, or in connection with the performance of the equipment
when so operated.
Laser Safety
This printer is certified as a Class 1 laser product under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard according to the Radiation
Control for Health and Safety Act of 1968. This means that the printer does not produce
hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective housings
and external covers, the laser beam cannot escape from the machine during any phase
of user operation.
Ozone Safety
The QMS 3825/3225/2025 Print System uses an ozone filter to remove any ozone
generated by the printer. Replace the ozone filter every 100,000 pages printed (every
20,000 pages on a 2025 Print System) and never operate the printer with the ozone filter
removed. Using the printer with the ozone filter installed protects the environment as well
as your health.
Electronics Emissions
Your printer complies with the Electronics Emissions Requirements of the German Federal
Minister for Postal and Telecommunication Technology regulation:
Vfg 1046/1984
Your printer complies with the Electronics Emissions Requirements of the European
Economic Council directive:
82/499/EEC
To Next Page
Loading...
Need help?
General
