Printin g M ultip le
Copie s
2-15
Daily Operation
3 Press the Select key to enter the menu. Press the Next key
until the Duplex menu appears.
The message window displays
OPERATOR CONTROL
DUPLEX
4 Press the Select key. Press the Next key until ON appears in
the message window. Press the Select key.
The message window momentarily displays
ON
IS SELECTED
and then
OPERATOR CONTROL
DUPLEX
5 Press the Online/Offline key, and the following prompt
appears:
SAVE CHANGES?
NO
6 Press the Next key until YES appears. Press the Select key
and then press the Online/Offline key to place the printer
back on line, making it available for the next print job.
Printing Multiple Cop ies
Your QMS printer can print up to 999 copies of your file. It is best to
leave the default as 1 and change the number of copies for each file
through your application. To change the number of copies through the
control panel, refer to the “Alphanumeric Values” section in chapter 1,
“Introduction,” of your system administrator’s guide.
To Next Page
Loading...
Need help?
General