Using the Lar ge-
La rge-Ca pac ity
Input Tray
2-27
Daily Operation
Using the La rge-Large-
Cap acity Input Tray
The Large-Large-Capacity Input Tray (LLCIT) for your QMS 3825/
3225 Print System allows you to load 2,500 sheets of paper at a time,
in letter, legal, ledger, A3, A4, and B4 sizes.
Installing the LLC IT
The LLCIT must be installed by a QMS-authorized service represen-
tative. See appendix A, “QMS Customer Support” if you do not know
how to reach your service contact.
Moving the Printer
Because the LLCIT holds a heavy load, it has a metal prop plate at
the back corner for added support. The prop plate helps prevent the
printer from tipping, even when the LLCIT is fully loaded. If you need
to move the printer, you must
■ Remove the paper from the LLCIT
■ Remove the prop plate to avoid damage to the printer or the floor
To remove the prop plate, simply remove the two screws holding it in
place. The prop plate slips off easily. Reinstall the prop plate as soon
as the printer is in its new location.
Be careful not to tip the printer while moving it.
WA RNING!
Once the LLCIT is installed, if y ou need to m ove the
printer from place to p lace, y ou m ust re mo ve the metal pr op plate
fr om under th e back corn er of the LLCIT. Be c areful not to tip the
printer while mo ving it.
ACHTUNG!
So ll der Dru c ker ver setzt werden un d der LLCIT ist
installiert, müssen Sie die Metallstütze u nter der hintere n Ec ke des
LLC IT entfernen. A chten Sie beim Versch ieben dar auf, daß das
Druckssy tem nicht kipp t.
To Next Page
Loading...
Need help?
General