Xerox 3225 - Page 76

QMS 3825/3225/2025 User's G uide3-14
Keeping the P rinter
Clea n
3 Push and raise
each separation
pawl to remove it
from the fusing unit.
3825/3225
2025
4 Clean each pawl by
wiping it with a
water-dampened
cloth.
You may need to use
a little force or a fin-
gernail to remove
any toner that contin-
ues to adhere to the
pawl. Never use any
fluid besides water to
clean the separation
pawls.
5 Replace each pawl by angling it slightly to insert it into a
slot and then pressing down to snap it in place.