Xerox 700 - Page 177

Xerox 700 Digital Color Press User Guide
Problem Solving
8-27
Cause: An error occurred during print processing. Probable causes
are as follows:
1. Printing was instructed by [automatic tray selection] when [Paper
Type Priority] is set to [Automatic Tray switching Off] for all paper in the
[Common Settings].
2. ESC/P command error
Remedy:
1. When printing by automatic tray selection, set one of the paper
types to a setting other than [Automatic Tray switching Off] in [Paper
Type Priority].
2. Check print data.
Cause/RemedyCode
Cause: Attempted to print [Job Template List] while updating the job
template.
Remedy: Retry printing after waiting for a period.
Cause: Annotation is not possible due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase
free disk space.
Cause: Delayed print documents cannot be registered.
Remedy: Check print options and specify the print data again. If the
hard disk is malfunctioning, contact your Xerox Customer Support
Center.
Refer to 003-751.
Cause: The input password does not agree with the password set to
the mailbox.
Remedy: Input the correct password.
Cause: Specified mailbox does not exist.
Remedy: Create a new mailbox or specify the existing mailbox.