Maintenance
212 Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
User Guide
3. Remove the packing material from the end of the new drum cartridge.
4. Rest the new cartridge, along with its black plastic protective shield, in the cartridge slot. Make sure
to load the cartridge in the direction of the arrow on the top of the shield.
5. With the guides inserted in the slot, to remove the black paper sheet, pull it in the direction shown.
6. Remove the tape from the top of the cartridge shield.
7. Hold the shield, then use the orange handle to push the cartridge into the printer.
8. Continue to push the orange handle until it stops.
9. Carefully remove the protective shield.
10. Push the drum cartridge until it stops.
To Next Page
Loading...
Need help?
General
