Installation and Setup
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer 39
User Guide
Turning the Printer On and Off
The printer has two power switches. The main power switch, located behind the front door, controls the
main power to the printer. The secondary power switch, located on the top of the printer, controls power
to the printer electronic components, and when turned off, initiates a software-controlled shutdown. The
preferred method to turn on and off the printer is to use the secondary power switch. To operate the
printer, turn on both switches. First turn on the main power switch, then turn on the secondary power
switch.
CAUTIONS:
• To prevent a printer malfunction or damage to the internal hard drive, turn off the secondary
power switch first. Wait 10 seconds after the touch screen goes dark, then turn off the main
power switch.
• Do not plug or unplug the power cord while the power switch is in the On position.
To turn on the printer:
1. Open the front door.
2. Turn on the main power switch.
To Next Page
Loading...
Need help?
General
