Maintenance
218 Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
User Guide
8. Place the new transfer roller in the printer as shown. Press down until the transfer roller clicks into
place.
9. Remove the protective cover from the transfer roller.
10. Close cover A.
Resetting Supply Life Counters
You must reset the supply life counters when you replace some supplies.
1. Press the Log In/Out button, enter the system administrator login information, then press Enter. For
details, see the System Administrator Guide at www.xerox.com/office/WC780Xdocs.
2. On the control panel, press Machine Status.
3. Touch the Tools tab, then touch Troubleshooting.
4. Touch Resets.
5. Touch Supply Counter Reset.
6. Touch the desired supply item, then touch Reset Counter.
7. On the confirmation screen, touch Reset.
8. Touch Close.
9. Press the Log In/Out button, then touch Logout.
To Next Page
Loading...
Need help?
General
