Xerox 7800

Maintenance
226 Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
User Guide
Replacing Staples in the Booklet Maker of the Professional Finisher
1. Open the front door of the finisher.
2. While squeezing orange levers R2 and R3 together (1), pull the staple cartridge unit out of the
finisher until it stops (2).
Note: The staple cartridge unit does not detach from the finisher.
3. Grip the orange tabs on both sides of the staple cartridge.
4. While gripping the orange tabs of the staple cartridge, rotate it in the direction shown.