EExxppoossuurree ttoo RRaaddiioo FFrreeqquueennccyy RRaaddiiaattiioonn
The radiated output power of this device is far below the radio frequency exposure limits of the FCC
and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained
between the antenna and any persons for this device to satisfy the RF exposure requirements of the
FCC and other regulatory agencies.
IInnnnoovvaattiioonn,, SScciieennccee aanndd EEccoonnoommiicc DDeevveellooppmmeenntt CCaannaaddaa
This device complies with Innovation, Science and Economic Development Canada license-exempt
RSS standards. Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
Innovation, Sciences et Développement économique Canada
Cet appareil est conforme aux normes RSS exemptes de licence d'Innovation, Sciences et
Développement économique Canada. Son fonctionnement est soumis aux deux conditions suivantes:
1. Cet appareil ne doit pas causer d'interférences et
2. Il doit accepter toutes les interférences, y compris les celles qui peuvent entraîner un
fonctionnement indésirable.
EEuurrooppeeaann UUnniioonn aanndd EEuurrooppeeaann EEccoonnoommiicc AArreeaa CCoommpplliiaannccee
The CE mark applied to this product indicates compliance to applicable EU Directives. The full
text of the EU Declaration of Conformity is located at https://www.xerox.com/en-us/about/ehs.
EU and Other Countries Statement of Radio Transmitter Operational Frequency Bands
and Maximum RF Power
This radio product transmits in either the 2.4GHz (2.412–2.472 GHz in the EU) or 5GHz (5.15–5.35,
5.47–5.725 in the EU) bands. The maximum transmitter EIRP power output, including antenna gain,
is ≤ 20dBm for both bands.
FFeeddeerraall CCoommmmuunniiccaattiioonnss CCoommmmiissssiioonn ((FFCCCC))
CCoommpplliiaannccee IInnffoorrmmaattiioonn SSttaatteemmeenntt
This product has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential installation. This equipment generates, uses, and can
Xerox
®
B230 Printer
User Guide
169
Regulatory Information
To Next Page
Loading...
Need help?
General
