Xerox B230 - Ethernet

Menu item
Description
• Auto*
Group Owner IP Address
Specify the IP address of the group owner.
Auto-Accept Push Button Requests
• Off*
• On
Accept requests to connect to the network
automatically.
Note: Accepting clients automatically is not
secured.
Note: An asterisk (*) next to a value indicates the factory default setting.
EEtthheerrnneett
Menu item
Description
Network Speed
Show the speed of an active network adapter.
IPv4 : Enable DHCP
• On*
• Off
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that lets a
server dynamically assign an IP address and
other network configuration parameters to
each device on the network, so that they can
communicate with other IP networks.
IPv4 : Set Static IP Address
• IP Address
• Netmask
• Gateway
Set the static IP address of your printer.
IPv6 : Enable IPv6
• On*
• Off
Enable IPv6 in the printer.
IPv6 : Enable DHCPv6
• Off*
• On
Enable DHCPv6 in the printer.
IPv6 : Stateless Address Autoconfiguration
• Off
• On*
Set the network adapter to accept the automatic
IPv6 address configuration entries provided by a
router.
IPv6
DNS Address
Specify the DNS server address.
IPv6 : Address Prefix
• 0–128 (64*)
Specify the address prefix.
Xerox
®
B230 Printer
User Guide
75
Use printer menus