Xerox B230 User Manual

Menu item
Description
Note: This menu item appears only if Wireless
Security Mode is set to WPA2/WPA-Personal.
802.1x Encryption Mode
• WPA+
• WPA2*
Enable wireless security through 802.1x standard.
Note: This menu item appears only if Wireless
Security Mode is set to 802.1x - Radius.
IPv4 : Enable DHCP
• On*
• Off
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that lets a
server dynamically assign an IP address and
other network configuration parameters to each
device on the network, so that they can
communicate with other IP networks.
IPv4 : Set Static IP Address
• IP Address
• Netmask
• Gateway
Set the static IP address of your printer.
IPv6 : Enable IPv6
• On*
• Off
Enable IPv6 in the printer.
IPv6 : Enable DHCPv6
• Off*
• On
Enable DHCPv6 in the printer.
IPv6 : Stateless Address Autoconfiguration
• Off
• On*
Set the network adapter to accept the automatic IPv6
address configuration entries provided by a router.
IPv6
DNS Address
Specify the DNS server address.
IPv6
Manually Assigned IPV6
Assign the IPv6 address.
Note: This menu item appears only in some
printer models.
IPv6
Manually Assigned IPV6 Router
Assign the IPv6 router address.
Note: This menu item appears only in some
printer models.
IPv6 : Address Prefix
• 0–128 (64*)
Specify the address prefix.
IPv6
All IPv6 Addresses
Show all IPv6 addresses.
IPv6
All IPv6 Router Addresses
Show all IPv6 router addresses.
Xerox
®
B230 Printer
User Guide
73
Use printer menus

Xerox B230 Specifications

General

Brand	Xerox
Model	B230
Category	Printer
Language	English