IInnffoorrmmaacciióónn ddee llaa eenneerrggííaa ddee MMééxxiiccoo
• Consumo de energía en operación: 570 Wh
• Consumo de energía en modo de espera: 0.1 Wh
• Cantidad de producto por unidad de energía consumida: 4.42 páginas/Wh
LLaasseerr NNoottiiccee
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I,
Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product
conforming to the requirements of IEC 60825-1: 2014.
Class I laser products are not considered to be hazardous. The laser system and printer are designed
so there is never any human access to laser radiation above a Class I level during normal operation,
user maintenance, or prescribed service conditions. The printer has a non-serviceable printhead
assembly that contains a laser with the following specifications:
• Class: IIIb (3b) AlGaInP
• Nominal output power (milliwatts): 25
• Wavelength (nanometers): 775–800
PPoowweerr
PPrroodduucctt PPoowweerr CCoonnssuummppttiioonn
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode
Description Power consumption (Watts)
Printing The product is generating hard-copy output from
electronic inputs.
One-sided: 570
Two-sided: 305
Ready The product is waiting for a print job. 4.9
Sleep Mode The product is in a high-level energy-saving mode. 0.9
Hibernate The product is in a low-level energy-saving mode. 0.1
Off The product is plugged into an electrical outlet, but the
power switch is turned off.
0.1
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.
SSlleeeepp MMooddee
This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves
energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is
Xerox
®
B310 Printer
User Guide
179
Regulatory Information