Menu item
Description
Off If PS SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
Mac Binary PS
Auto*
On
Off
Set the printer to process Macintosh binary PostScript
print jobs.
• On processes raw binary PostScript print jobs.
• Off filters print jobs using the standard protocol.
Energy Efficient Ethernet
Auto*
On
Off
Reduce power consumption when the printer does
not receive data from the Ethernet network.
* An asterisk next to a value indicates the factory default setting.
TTCCPP//IIPP
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
Description
Set Hostname
Set the current TCP/IP host name.
Allow DHCP/BOOTP to update NTP server
On*
Off
Allow the DHCP and BOOTP clients to update the
NTP settings of the printer.
Enable Auto IP
On*
Off
Assign an IP address automatically.
DNS Address
Specify the current Domain Name System (DNS)
server address.
Backup DNS
Specify the backup DNS server addresses.
Backup DNS 2
Backup DNS 3
Enable DDNS
Off*
On
Update the Dynamic DNS settings.
84
Xerox
®
B310 Printer
User Guide
Use Printer Menus
To Next Page
Loading...
