Xerox C410 - Page 108

MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
• Enable Formsmerge
– Off*
– On
disk..
PPrriinntteerr EEmmuullaattiioonnss
• Enable Prescribe
– Off*
– On
Enable Prescribe emulation.
PPrriinntteerr EEmmuullaattiioonnss
• Emulator Security
– Page Timeout (60 minutes)
– Reset Emulator After Job (Off*)
– Disable Printer Message Access (On*)
Configure the security settings of the printer during
emulation
PPrriinntt CCoonnffiigguurraattiioonn
• Black Only Mode
– Off*
– On
Reset the emulator after a print job.
PPrriinntt CCoonnffiigguurraattiioonn
• Color Trapping
– Off
– 1
– 2*
– 3
– 4
– 5
Enhance the printed output to compensate for
misregistration in the printer.
PPrriinntt CCoonnffiigguurraattiioonn
Font Sharpening
0–150 (24*)
Set a text point-size value below which the high-
frequency screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24
points or less use the high-frequency screens.
DDeevviiccee OOppeerraattiioonnss
• Quiet Mode
– Off*
– On
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the
printer performance.
DDeevviiccee OOppeerraattiioonnss
• Panel Menus
Enable access to the control panel menus.
108
Xerox
®
C410 Color Printer User Guide
Use Printer Menus