Xerox D136 - Page 285

Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-282
Cause: HCS sensor failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-283
Cause: HCS sensor failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-284
Cause: HCS sensor failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-285
Cause: HCS sensor failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-286
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
20-19Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
High Capacity Stacker (HCS)