Xerox D136 - Page 286

If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-287
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-288
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-300
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-310
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
049-500
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Cooling Module and the HCS.
User Guide20-20
High Capacity Stacker (HCS)