Xerox EC8056 - Page 194

4. Load the paper in the tray.
• For long-edge feed, insert letterhead and pre-printed paper face up with the top edge toward the front of
the tray. Load hole-punched paper with the holes leading into the printer.
• For short-edge feed, insert letterhead and pre-printed paper face up with the top edge leading into the
printer. Load hole-punched paper with the holes toward the rear of the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to jam.
5. Adjust the width guides until they touch the edges of the paper.
6. At the control panel, select the correct paper size, type, and color:
• To select a new paper size, touch SSiizzee.
• To select a new paper type, touch TTyyppee. For letterhead paper, touch LLeetttteerrhheeaadd. For pre-printed paper,
touch PPrree--PPrriinntteedd. For hole-punched paper, touch HHoollee PPuunncchheedd.
• To select a new paper color, touch CCoolloorr.
194
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide
Paper and Media