7. To confirm the settings, touch CCoonnffiirrmm.
LOADING PAPER IN TRAY 6
Tray 6 is an optional high-capacity, dedicated paper tray. It is on the left side of the printer. The tray feeds A4 (210
x 297 mm), Letter (8.5 x 11 in.), JIS B5 (182 x 257 mm), or Executive (7.25 x 10.5 in.) paper. The tray capacity is
2000 sheets.
The control panel displays a warning message when the paper in the tray is in short supply, or when the tray is
empty.
To change the paper size, refer to Configuring Tray 6.
1. Pull out Tray 6 from the feeder until it stops.
2. Open the side gate until it stops.
3. The control panel displays the paper settings. Ensure that you load the correct paper type in the tray.
Note: Do not load custom-size paper into Tray 6.
4. Fan the edges of the paper before loading it into the paper trays. This procedure separates any sheets of paper
that are stuck together and reduces the possibility of paper jams.
Note: To avoid paper jams and misfeeds, do not remove paper from its packaging until necessary.
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide 195
Paper and Media
To Next Page
Loading...
