4. Load the paper in the tray.
• For long-edge feed, insert letterhead and pre-printed paper face up with the top edge toward
the front of the tray. Load hole-punched paper with the holes leading into the printer.
• For short-edge feed, insert letterhead and pre-printed paper face up with the top edge leading
into the printer. Load hole-punched paper with the holes toward the rear of the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the
printer to jam.
5. Adjust the width guides until they touch the edges of the paper.
196
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General
