6. At the control panel, select the correct paper size, type, and color:
• To select a new paper size, touch Size.
• To select a new paper type, touch Type. For letterhead paper, touch Letterhead. For pre-
printed paper, touch Pre-Printed. For hole-punched paper, touch Hole Punched.
• To select a new paper color, touch Color.
7. To confirm the settings, touch Confirm.
LLooaaddiinngg PPaappeerr iinn TTrraayy 66
Tray 6 is an optional high-capacity, dedicated paper tray. It is on the left side of the printer. The tray
feeds A4 (210 x 297 mm), Letter (8.5 x 11 in.), JIS B5 (182 x 257 mm), or Executive (7.25 x 10.5 in.)
paper. The tray capacity is 2000 sheets.
The control panel displays a warning message when the paper in the tray is in short supply, or when
the tray is empty.
To change the paper size, refer to Configuring Tray 6.
1. Pull out Tray 6 from the feeder until it stops.
2. Open the side gate until it stops.
3. The control panel displays the paper settings. Ensure that you load the correct paper type in the
tray.
Note: Do not load custom-size paper into Tray 6.
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
197
Paper and Media
To Next Page
Loading...
Need help?
General
