3. Load envelopes in the tray.
• For envelopes with the flap on a long edge, load envelopes with the flaps closed, flaps up, and flaps on the
leading edge, toward the right.
• For envelopes with the flap on a short edge, load envelopes with the flaps closed, flaps up, and flaps on the
leading edge, toward the right.
4. Center the stack of envelopes. Adjust the guides so that they touch the edges of the envelopes.
5. At the control panel, select the correct paper size, type, and color.
• To select an envelope size, touch SSiizzee. To specify a custom envelope size, touch CCuussttoomm, then specify the
dimensions of the envelope.
• For a custom envelope size, touch TTyyppee, then touch EEnnvveellooppee.
• To select a new envelope color, touch CCoolloorr.
Note: When you select an envelope size from the list, the paper type is set to Envelope.
6. To confirm the settings, touch CCoonnffiirrmm.
Loading the Envelope Tray
You can use the optional Envelope Tray in place of Tray 1. The Envelope Tray holds the following envelope sizes:
• Envelope 6 x 9, Monarch, No. 9, and No.10
• DL, C5, and C6
198
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide
Paper and Media
To Next Page
Loading...
