WASTE TONER CONTAINER
Replacing the Waste Toner Container
A message appears on the control panel when the waste toner container must be replaced.
When replacing the waste toner container, clean the printhead lenses. For details, see Cleaning the Printhead
Lenses.
CCaauuttiioonn:: Spread paper on the floor to catch possible toner spills.
WWaarrnniinngg:: If you spill any toner in the printer, wipe it up using a moist cloth. Never use a vacuum cleaner
to remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.
WWaarrnniinngg:: If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some
toner remains on your clothes, use cool water, not hot, to rinse off the toner. If toner gets on your skin,
wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out immediately with
cool water and consult a doctor.
Note: Each waste container includes installation instructions.
To replace the waste toner container:
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
1. Open the front cover of the printer.
2. Remove the new waste toner container from the packaging. Retain the packaging.
220 Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide
Maintenance
To Next Page
Loading...
