4. Pull the staple cartridge clamp firmly in the direction shown to open it.
5. Remove the jammed staples, then push the clamp in the direction shown until it snaps into the locked position.
WWaarrnniinngg:: The points of the jammed staples are sharp. Remove the jammed staples carefully.
6. Grasp the staple cartridge by the orange handle, then insert the cartridge into the stapler until it clicks.
7. Close the finisher front door.
292 Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide
Troubleshooting
To Next Page
Loading...
