Clearing Staple Jams in the Office Finisher LX
WWaarrnniinngg:: Do not perform this procedure while the printer is printing.
1. Open the front door of the Office Finisher.
2. Reach into the finisher cabinet and pull the stapler assembly toward you until it stops.
3. Push the stapler assembly to the right as shown.
4. Grip the staple cartridge by the orange handle and pull it firmly toward you to remove it.
5. Check inside the finisher for any loose staples and remove them.
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide 293
Troubleshooting
To Next Page
Loading...
