6. Pull the staple cartridge clamp firmly in the direction shown to open it.
7. Remove the jammed staples by pulling them in the direction shown.
WWaarrnniinngg:: The points of the jammed staples are sharp. Remove the jammed staples carefully.
8. Push the clamp in the direction shown until it snaps into the locked position.
9. Grip the staple cartridge by the orange handle and insert it into the stapler assembly. Push it in until it clicks.
10. Close the front door of the Office Finisher.
294
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide
Troubleshooting
To Next Page
Loading...
