2. Grasp the booklet maker handle and pull the unit toward you until the staple cartridges appear on the top edge
of the device.
3. To remove a staple cartridge from the booklet maker, push down on the staple cartridge handle, as shown, then
pull the cartridge out and up.
4. Turn over the staple cartridge.
5. To permit the staple cartridge handle to open out and away from the staple pack, press in the green tabs, then
pull back the handle.
Note: If you do not see the staple jam, remove the staple case.
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide 299
Troubleshooting
To Next Page
Loading...
