6. To remove the staple case, press the rear of the case as shown.
Note: If you can see the staple jam, open the staple cartridge clamp.
7. To open to the staple cartridge, pull it firmly in the direction shown.
WWaarrnniinngg:: The points of the jammed staples are sharp. Remove the jammed staples carefully.
8. Remove the jammed staples, then push the clamp in the direction shown until it snaps into the locked position.
9. Return the staple cartridge to the booklet maker, then return the booklet maker to its original position.
Clearing Hole Punch Jams
Clearing Hole Punch Jams in Office Finisher LX
If the printer stops printing and reports a hole-punch jam, empty the hole-punch waste container. For details, refer
to Emptying the Hole Punch Waste Container.
After emptying the hole-punch waste container, locate and remove any paper jams.
300
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide
Troubleshooting
To Next Page
Loading...
