Symptoms
Solutions
Lines or streaks only present in copies made from the
document feeder.
There is debris on the document glass. When
scanning, the paper from the document feeder
passes over the debris, creating lines or streaks. Clean
all glass surfaces with a lint-free cloth.
Spots present in copies taken from the document
glass.
There is debris on the document glass. When
scanning, the debris creates a spot on the image.
Clean all glass surfaces with a lint-free cloth.
The reverse side of the original document is showing
on the copy or scan.
Turn on Background Suppression.
Image is too light or too dark. Adjust the Lighten/Darken or Contrast settings.
Colors are inaccurate. Copy: Adjust the Color Balance settings.
Scan: Confirm the correct Original Type is set.
If the problem persists, for online support information, go to www.support.xerox.com.
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
311
Troubleshooting
To Next Page
Loading...
Need help?
General
