General Procedures and Information
6-6 11/06 FaxCentre 2121/2121L
First Printing Time At 600 × 600dpi 3 sec (A4L/Letter L)
At 1200 × 600dpi 21 sec or less (A4L/Letter L)
At 1200 × 1200dpi 21 sec or less (A4L/Letter L)
Multi Print Speed At 600dpi 20ppm (A4)
20ppm (Letter L)
Warm-up Time Rated voltage sup-
plied at 23°C
10 sec. or less
From Pause to be
ready for first print
21 sec. or less (for a condition immediately after
power has been turned ON)
System Speed Normal 115mm (4.5 inch)/sec
Half-speed 57.505mm (2.2 inch)/sec
Paper Feeding System 1-way system (Multipurpose Tray)
Capacity (recommended
paper)
MP Tray 150 sheet
Paper Exit System Face down
Tray capacity 100 sheets
Drum Charging System Rotating brush + pre-charge film
Developing System FMT single-component developing system
BTR Transfer Roller system
Drum OPC (organic photoconductor)
Drum Cleaning System Non-cleaner system
Detack System Curvature separating system
Charge Neutralizing Needle
Fuser System Heated roller system
Dimensions Width: 386.8mm (15.2 inch)
Depth: 404.5mm (15.92 inch)
Height: 348mm (13.7 inch)
Weight 7.8kg/17.16lb (including DC/TC)
Power Requirements 100V, 50/60Hz ± 3Hz, 9.2A or less
Max. Power Consumption 900W
Acoustic Noise Standby 30dB(A) or less
Printing 54dB(A) or less
Operating Environment 10°C to 35°C (50°F to 95°F), 15% to 85%
Table 5: Printer General Specifications
Item FaxCentre 2121
To Next Page
Loading...
