General Procedures and Information
6-44 11/06 FaxCentre 2121/2121L
• Erase all, including the e-mail addresses stored in the directory, except for the other data in
the directory. Reset to default configuration (combination of functions 0, 2, 6, 8):
• Erase all documents in memory (documents to be transmitted, received documents and
deposited documents):
CAUTION
This procedure will erase the network enablement option. If this is done on a network enabled
machine, a new network option will have to be purchased.
• Complete reset of the machine (combination of functions 0, 1, 2, 6, 8):
• Erase first element of printing queue:
• Re-initialize the remote readout counter:
Other Functions
For these functions, bit 8 of configuration 1 of the installation parameters must first have been set
to 1.
• Printout of all parameters (including installation and technical parameters):
• Switch to forced standby mode, independently of the clock:
• Switch to “software download by phone” mode:
• Switch to “software download by PC link” mode:
MENU
To Next Page
Loading...
