Status Indicator RAPs
FaxCentre 2121/2121L 11/06 2-13
11 High Voltage Failure RAP
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
• The Drum Charge Monitor Voltage (HVC_MON) signal falls outside a predetermined range at
any time after the lapse of a predetermined period of time after the power switch has been
turned ON.
• The Image Transfer Voltage Monitor signal (T_MON_V) and Image Transfer Current Monitor
signal (T_MON_I) fall outside a corresponding predetermined range.
Table 10: High Voltage Failure
Checks and Causes Solutions
1. Check the HVPS. 1. If a High Voltage Failure still occurs, install
a new HVPS (PL 11).
To Next Page
Loading...
