Service Call Procedures
1-4 11/06 FaxCentre 2121/2121L
SCP 2 Preventive Maintenance
To maintain the machine in good working order, it is recommended to periodically perform the fol-
lowing operations:
• Clean the paper transport rolls (document feed rolls, feed rolls, idler rolls).
• Clean the retard pad.
• Clean the CIS window.
• Clean the control panel keys and the machine covers.
Note: To clean the machine, use a soft cloth. Never use abrasives or detergents.
Paper Transport Rolls
Figure 1
To clean the paper transport rolls perform the following:
1. Set the on/off switch to “O” (off).
2. Open the control panel/scanner by actuating the cover release latch located on the left of the
machine.
CAUTION
The opening is limited to approx 60° by stops. Do not try to force the panel any further.
Paper transport rolls
Retard pad
CIS
window
Top cover re-
lease latch
To Next Page
Loading...
