Repairs and Adjustments
FaxCentre 2121/2121L 11/06 4-13
REP 6 Fuser Assembly
Parts list on PL 10
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
WARNING
Do not touch the fuser or any surfaces around the fuser while they are hot.
Removal
1. Turn OFF the power switch, unplug the power cord and let the machine cool down.
2. Remove the left and right covers.
3. Remove the Control Panel/Scanner Chassis Assembly (REP 19).
4. Remove two screws and two washers. Then, remove the fuser protective cover.
Figure 1
5. Remove the upper transport cover.
Remove two screws, unplug three connectors, and remove the fuser.
Figure 2
6. Remove the fuser exit guide assembly from the fuser.
To Next Page
Loading...
