Image Quality
FaxCentre 2121/2121L 11/06 3-5
IQ 2 Deletions RAP
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
• White spots occur periodically on the print.
Table 2: Deletions
Checks and Causes Solutions
1. Determine the source of the problem. Make
a copy. Print an internal test pattern.
Note: To print an internal test pattern, set
SOS 1 Bit 8 to 1, then press the # key, refer to
GP 4.
2. Is paper damp? 1. Load fresh paper.
3. Is the drum scratched? 2. Install a new Drum Cartridge (PL 13).
4. Is there foreign matter in paper path? 3. Remove foreign matter.
5. Is BTR dirty or scratched? 4. Install a new BTR (PL 12).
5. Install a new HVPS (PL 11).
6. Install a new Main PBA (PL 5).
To Next Page
Loading...
