Repairs and Adjustments
4-28 11/06 FaxCentre 2121/2121L
REP 14 Wrap Spring Feed Clutch
Parts list on PL 12
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Removal
1. Remove the Paper Feed Clutch (REP 13).
2. Remove the coupling gear, then the Wrap Spring Feed Clutch.
Figure 1
Replacement
The Coupling Gear has five positions for adjusting the position of the Feed Roller (Figure 2).
Figure 2
When the Wrap Spring Feed Clutch is replaced, adjust the set position of the Coupling Gear so
that the Feed Roller is correctly positioned. The procedure is as follows.
1. Assemble the Paper Feed Clutch.
2. Re-install the Paper Feed Solenoid.
To Next Page
Loading...
