Status Indicator RAPs
FaxCentre 2121/2121L 11/06 2-15
13 Power Supply Failure RAP
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
• The machine fails to turn ON when it is powered.
Table 12: Power Supply Failure
Checks and Causes Solutions
1. Check that the power cord is connected into
the power outlet.
1. Connect the power cord into the power out-
let
2. Check that the power cord is connected to
the machine.
2. Connect the power cord correctly into the
machine.
3. Disconnect the power cord from the power
outlet and the machine.
3. Check the continuity of the power cord. If
necessary, install a new power cord (PL 1).
4. Check if the power switch is turned ON. 3. Turn ON the power switch.
5. Check the fuses on the LVPS are not con-
ducting.
4. Install a new LVPS (PL 11).
5. Install a new Main PBA (PL 5).
To Next Page
Loading...
