Status Indicator RAPs
FaxCentre 2121/2121L 11/06 2-3
1 Initial Checks RAP
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Initial Inspection
1. Check the power
• The machine does not work no matter how long you wait.
Is the power switch (machine and wall socket) turned on?
Is the power cord connected to the machine correctly?
Is the power cord connected to the wall socket correctly?
Is the wall socket working?
Is the unit rated at the same voltage as the supply?
• Does the fan work when power is turned on?
Check the connectors on the LVPS and/or HVPS, PL 11.
Check the fuses on the LVPS and/or HVPS, PL 11.
2. Check the installation environment
• Ensure the installation surface is flat, level and free from vibration. If necessary, move the
machine.
• Ensure that the temperature and humidity of the surroundings are within specification. If nec-
essary, move the machine.
• Ensure that the machine is positioned away from any air conditioning or other heating or cool-
ing equipment. Also ensure that it is not positioned in a direct draft from any air conditioning,
fan or open window. If necessary, move the machine.
• Ensure the machine is not positioned in direct sunlight. If unavoidable, use a curtain to shade
the machine.
• Ensure the machine is installed in a clean dust free environment. Move the machine to a
clean area if necessary.
• Some industrial or cleaning processes give of fumes which can affect the machine. Move the
machine away from this type of air pollution.
3. Check the paper type
• Only use paper which is of suitable quality, weight and size. See the User Guide.
4. Check the overall condition of the machine
• Clean the paper transport areas. Any rollers with dirty surfaces should be cleaned. If neces-
sary, install new rollers.
To Next Page
Loading...
